Lantern, Railroad

Object Name:

Lantern, Railroad

Object ID:

1968.506.04

Date:

1870

Description:

Lantern, Concord Railroad. Tin-plated sheet iron and glass. Two reeded decorations close together and near collar. On bottom are diamond-shaped perforations. Top edge is turned over. Vertical solder joint on one side. Smaller diameter collar around glass reservoir which also has vertical soldered seam. Slightly turned-over edge at top of central collar to help hold reservoir in place. Brass collar on top of reservoir that has single wide wick with adjusting knob. Two locking slots in top edge of outer collar of base. Glass section has narrow metal collar about 0.8" high around its base which is held in place by plaster. Vertical solder joint in collar. Two locking pins that extend from opposite sides of collar. Glass has slightly bulging sides near bottom then slight straight taper to heavy glass ring at top edge. Red-colored glass. Sheet-metal straight-sided section at top with cone-shaped cover that is part of it. Vertical seam on side and on side of conical section. Flared collar where side and top section meet. Series of three-reeded decorations around mid-section of cone. Upper area of flat side is a horizontal row of five-pointed star perforations. Above it is a series of diamond-shaped perforations then another row of five-pointed star perforations. Hole in top of cone section. Sheet-metal strap at top of cone section which has a disc on top of it and circular sheet-metal handle. These are joined together by a heavy wire. Loop at top end of wire. It looks like there's a wire loop at end of wire that is around another wire that passes through strap and sides of cone near top. Second wire also has loops on its ends. Sheet-metal handle is approximately 0.75" wide and has diameter of 4.3". Reeded section around its center and both edges are turned up and rolled over. Ends of handle overlap at junction with body. Surfaces are all black asphaltum color but there is dirt and other residues on the surface. Old repair holding top section and glass together. Four metal tabs that extend downward and over edge of glass collar. Wire that passes over ends of metal tabs and is twisted tightly at one location. Tab ends are turned up and over wire. Metal baffle at top of glass inside metal cover section. On side of cone is small metal plaque with relief letters: "NO 23". Engraved letters: "C. R. R." in Old English style on side of glass about 1/3 of way up side and roughly near widest section.

Material:

Metal
Glass
Tin
Iron
Brass

Dimensions:

H-17.1 Dia-4.1 inches

Provenance:

Probably a Concord Railroad lantern. In 1889 the Concord R.R. merged and became the Boston & Montreal.

Credit Line:

New Hampshire Historical Society Collection